Accessories and fixings are essential components in drywall and ceiling installations. They support secure installation, clean finishing, proper joint treatment, and improved system performance.
At Fekratek Al Raedah, we provide screws, anchors, tapes, beads, hangers, clips, insulation accessories, and fixing components suitable for residential, commercial, and large-scale projects.
Bull Nose Bead is used to create smooth and rounded external corners for gypsum board applications. It helps reduce edge damage compared to sharp corners and provides a clean, professional finish.
• Sizes:
25 × 25 mm, 30 × 30 mm
• Length:
3000 mm
• Thickness:
0.40 mm, 0.50 mm
External Corner Bead is used to finish and protect external corners in gypsum board applications. It provides strong edge protection, helps reduce damage, and delivers a clean, professional corner finish.
• Sizes:
25 × 25 mm, 30 × 30 mm, 35×35 mm
• Length: 3000 mm
• Thickness: 0.40 mm
Internal Corner Bead is used to finish and reinforce internal corners in gypsum board applications. It helps create clean, straight corners and provides a neat professional finish.
• Sizes:
25 × 25 mm, 30 × 30 mm, 35 × 35 mm
• Length: 3000 mm
• Thickness: 0.50 mm
LC Bead, also known as J Shaped Bead, is used with gypsum board edges to provide a clean and professional finishing detail. It helps protect exposed board edges and creates a neat transition around openings, edges, and finishing points.
• Sizes:
20 × 10 mm, 30 × 10 mm
• Length: 3000 mm
• Thickness: 0.40 mm, 0.45 mm, 0.50 mm
L-Bead is used at gypsum board edges and termination points where a clean and straight finish is required. It helps protect exposed board edges and provides a neat finishing detail, especially around doors, windows, and areas where standard stopping beads are not suitable.
• Size: 30 × 30 mm
• Length: 3000 mm
• Thickness: 0.40 mm, 0.50 mm
Stopping Bead is used at the edges and termination points of gypsum boards to provide a straight, clean, and protected finish. It helps protect exposed board edges and allows jointing compound and paint to be applied neatly on site.
• Sizes:
20 × 15 × 13 mm
20 × 15 × 15 mm
20 × 15 × 16 mm
• Length: 3000 mm
• Thickness: 0.40 mm, 0.45 mm, 0.50 mm
Shadow Gap Angle is used to create a clean decorative shadow line between walls, ceilings, or different surfaces. It provides a modern architectural finish while protecting board edges and maintaining a neat transition detail.
• Sizes:
25 × 12.5 × 10 mm
25 × 15 × 10 mm
25 × 16 × 10 mm
30 × 12.5 × 10 mm
30 × 15 × 10 mm
30 × 16 × 10 mm
• Length: 3000 mm
• Thickness: 0.45 mm
M-50 Shadow Gap Angle is used to create clean decorative shadow lines in gypsum board applications. It provides a modern architectural finishing detail while helping protect board edges and maintain a neat transition between surfaces.
• Sizes:
20 × 15 × 13 × 15 mm
20 × 15 × 15 × 15 mm
20 × 15 × 16 × 15 mm
• Length: 3000 mm
• Thickness: 0.45 mm
Casing Bead is used to finish and protect gypsum board edges where a clean termination detail is required. It provides a neat edge finish and allows jointing compound and paint to be applied smoothly on site
• Sizes:
20 × 15 × 13 mm
20 × 15 × 15 mm
20 × 15 × 16 mm
• Length: 3000 mm
• Thickness: 0.40 mm, 0.45 mm, 0.50 mm
C-Clamp is used to connect the main channel to the ceiling or supporting structure using a threaded rod. It provides a strong and stable connection for suspended ceiling systems.
• Diameter: 6 mm, 8 mm, 10 mm
• Flange Size: 35 / 35 mm
• Width: 40 mm, 48 mm
• Thickness: 0.50 mm
Adjustable Furring Channel Clip is used to adjust and fix furring channels to walls or concrete ceilings. It is fixed using anchors, allowing the furring channel to be installed easily without additional fasteners.
• Suitable for Furring Channels: 70 mm and 85 mm
• Anchor Size:
M6 × 55 mm, M6 × 65 mm, M6 × 95 mm
• Thickness: 0.50 mm
Slotted L-Bracket with Mini Holes is designed to provide strong and stable support for heavy walls and external wall applications. It is fixed to the wall or ceiling to help transfer loads and support the framing system.
• Sizes:
50 × 45 × 75 mm
50 × 75 × 75 mm
50 × 80 × 75 mm
50 × 125 × 75 mm
• Thickness:
1.50 mm, 3.00 mm
Acoustic V-Brace is designed to support twin stud wall systems and improve acoustic performance. It is made from spring steel to help reduce sound transmission between wall frames.
• Length: 105 mm
• Width: 42 mm
• Thickness: 0.90 mm
Beam Clamp is used to fix suspension points to steel beams without drilling. It provides a strong and quick fixing solution for suspension systems.
• Sizes:
M8, M10, M12
• Thickness / Capacity:
M8: up to 18 mm
M10: up to 20 mm
M12: up to 28 mm
Acoustic Brace is designed to reduce sound transmission between wall frames. It includes a thermal rubber separator that helps reduce vibration transfer while improving wall stability and acoustic performance.
• Thickness: 1.5 mm
• Packaging: 50 pcs / box
Furring Channel Clip is used to connect secondary furring channels to the main channel in suspended ceiling systems, helping to provide a stable and organized metal framing structure.
• Diameter: 2.5 – 3.0 mm
• Suitable for Furring Channels:
70 mm, 85 mm
Adjustable Clip is used with suspension rods to support T-Grid and gypsum ceiling systems. It provides flexibility during installation and allows easy height adjustment
• Dimensions: 58 × 32 × 17 mm
• Thickness: 0.40 mm
Glasswool Insulation is made from fine bonded glass fibers and provides effective thermal and acoustic insulation. It is lightweight, flexible, easy to cut, and suitable for use in ceiling, wall, and partition systems.
• Thickness: 25 mm, 50 mm, 75 mm, 100 mm
• Density:
10, 12, 16, 24 kg/m³
Note: Thicknesses and densities are not limited to the values listed above.
Rockwool Insulation is made from natural minerals such as basalt, melted at high temperatures and formed into insulation fibers. It provides excellent thermal and acoustic insulation, with good strength, durability, and easy cutting and shaping.
• Thickness: 25 mm, 50 mm, 75 mm, 100 mm
• Density:
40, 48, 64, 80, 100 kg/m³
Note: Thicknesses and densities are not limited to the values listed above.
Fiber Joint Tape is made from woven fiberglass and used to reinforce gypsum board joints. It is easy to apply and provides strong joint reinforcement for a smooth and durable finish.
• Width: 50 mm
• Length: 90 m
• Mesh Size: 2.85 × 2.85 mm
• Packaging: 24 rolls / carton
Paper Joint Tape is used with jointing compound to reinforce gypsum board joints and help reduce cracking and shrinkage. It provides a smooth and durable finish for drywall joint treatment.
• Width: 50 mm
• Length: 90 m
• Paper Thickness: 210 – 230 microns
• Packaging: 24 rolls / carton
Metal Corner Tape is made from strong paper reinforced with corrosion-resistant metal strips. It is used to protect internal and external corners, providing high durability and resistance to impact and cracking.
• Width: 50 mm
• Length: 30 m
• Paper Thickness: 210 – 220 microns
• Metal Width: 11 mm
• Metal Thickness: 0.22 – 0.23 mm
Control Joint / Expansion Joint is designed for gypsum board applications to allow controlled movement and help reduce cracks caused by stress. It includes two galvanized metal parts with a flexible center joint and a protective tape to keep the joint clean during installation.
• Length: 3000 mm
• Movement Allowance: up to 8 mm in each direction
• Packaging: 25 pcs / box
Closed Cell Resilient Tape is a self-adhesive closed-cell foam tape used to reduce vibration and sound transmission between building elements. It also helps improve acoustic and thermal insulation and absorbs impact in drywall and ceiling systems.
• Width: 48 mm
• Length: 7.5 m
• Thickness: 3 mm
Backing Rod is a flexible round foam rod used as a backing material for expansion joints and gaps before applying sealant. It helps fill voids and supports a proper seal against air and water.
• Diameter: 10 mm, 20 mm
• Length: 200 m, 500 m
• Color: White / Grey
Fiber Mesh is made from woven composite fibers and provides an economical and effective solution for reinforcing surfaces in different applications.
• Width: 1 m
• Length: 100 m
• Packaging: 1 roll
UDZ Wedge Anchor is designed for secure fixing in concrete. It works through an expansion mechanism that provides strong anchoring and reliable performance in fixing applications.
• Size: M6 × 40 mm
• Packaging: 100 pcs / box
Trubolt Stud Anchor is a heavy-duty expansion anchor designed for permanent fixing in concrete. It provides strong anchoring performance and helps prevent rotation during installation.
• Sizes:
M6 × 55 mm
M6 × 65 mm
M8 × 65 mm
M8 × 95 mm
• Packaging:
100 pcs / box
50 pcs / box
Drop-in Anchor is an internally threaded steel anchor used for medium-duty fixing in concrete. It allows bolts or threaded rods to be installed securely and requires a setting tool for proper expansion.
• Sizes:
M6 × 25 mm
M8 × 30 mm
M10 × 40 mm
• Packaging: 100 pcs / box
Wafer Head Self Drilling Screw is used to assemble metal framing components up to 3.0 mm thickness. Its wide head provides better pressure distribution, making it suitable for general light to medium fixing applications.
• Size: M4.2 × 13 mm
• Packaging: 500 pcs / box
Self Tapping Screw is used to fix gypsum boards and accessories to metal frames with thickness below 0.8 mm. It can penetrate the metal and form its own thread during installation, providing easy and controlled fixing.
• Sizes:
M3.5 × 25 mm
M3.5 × 30 mm
M3.5 × 35 mm
M3.5 × 45 mm
M3.5 × 55 mm
M3.5 × 60 mm
M4.2 × 70 mm
• Packaging:
1000 pcs / box
500 pcs / box
Self Drilling Screw is used to fix gypsum boards to metal frames with thickness from 0.90 mm up to 3.0 mm. It drills and fixes at the same time without the need for pre-drilling, providing fast and secure installation.
• Sizes:
M3.5 × 25 mm
M3.5 × 30 mm
M3.5 × 35 mm
M3.5 × 45 mm
M3.5 × 55 mm
M3.5 × 60 mm
M4.2 × 70 mm
• Packaging:
1000 pcs / box
500 pcs / box
Laminating Self Tapping Screw is used to temporarily fix gypsum boards together during bonding or installation. It features a coarse thread that provides strong holding power and helps reduce screw slippage.
• Sizes:
M3.5 × 32 mm
M3.5 × 38 mm
M3.5 × 30 mm
M3.5 × 48 mm
M4.2 × 60 mm
• Packaging: 1000 pcs / box
Procem Self Drilling Screw is used to fix Procem and Fiber Cement boards, along with accessories, to metal frames with thickness from 0.6 mm to 1.20 mm. It features a drill point and fine thread for better installation control, with ribs under the head to help seat the screw properly.
• Sizes:
M3.9 × 20 mm
M3.9 × 25 mm
M3.9 × 35 mm
M3.9 × 45 mm
Hex Head Self Drilling Screw is used for fixing metal to metal or attaching accessories to metal frames with thickness from 0.8 mm to 3.0 mm. It provides strong fixing performance and fast installation in metal framing applications.
• Sizes:
M4.8 × 19 mm
M5.5 × 25 mm
Hex Washer Head Self Drilling Screw is used for fixing metal to metal or attaching different accessories to metal frames with thickness from 0.8 mm to 3.0 mm. It provides strong fixing performance, high torque resistance, and fast installation in metal framing systems.
• Sizes:
M5.5 × 20 mm
M5.5 × 25 mm
M5.5 × 32 mm
M5.5 × 50 mm
M6.3 × 50 mm
• Packaging:
1000 pcs / box
500 pcs / box
Threaded Rod is used for suspending ceiling systems, where one side is fixed to the concrete or supporting structure and the other side is connected to the ceiling framing system.
• Length: 3000 mm
• Diameter: 6 mm, 8 mm, 10 mm
Acoustic Hanger is a U-shaped fixing accessory with a rubber layer designed to absorb vibration. It is used with threaded rods to reduce sound and vibration transmission between the ceiling and the supporting structure.
• Thickness: 1.5 mm
• Working Load: 50 kg
Steel Nails Spit HC6-17 are high-performance fixing nails used with fixing tools to fasten gypsum tracks and metal systems quickly and efficiently to concrete or suitable surfaces
• Sizes:
17 mm
22 mm
27 mm
32 mm
Wire Anchor is a heavy-duty fixing anchor supplied with a wire for easy installation. It provides fast and secure fixing with balanced pressure distribution inside concrete
• Size: M6 × 60 mm
• Packaging: 100 pcs / box
Wire Hanger is used with suspension systems to support T-Grid and false ceiling systems. It provides a practical and stable solution for ceiling suspension applications.
• Length: 3000 mm
• Packaging: 100 pcs / bundle
Adjustable Batten Bracket is used to fix and adjust channels on walls and ceilings with accuracy. It provides a fast and practical installation solution without the need for additional accessories.
• Length: 108 mm
• Thickness: 0.70 mm
من نحن
المشاريع
فريق العمل
2025 حقوق النشر و الطبع محفوظة
شركة فكرتك الرائدة ©
2025 All Rights Reserved
© Fekratek AL Raedah Company
يستخدم هذا الموقع ملفات تعريف الارتباط (الكوكيز) لتوفير أفضل تجربة تصفح لك.
